H3C MSR Series

924
Policy Description
--------------------------------------------------------------------------------
3 IPv6Description3
4 Description for IPv6 4
# Display information about IPv6 connection limit policy 3.
<Sysname> display connection-limit ipv6-policy 3
IPv6 connection limit policy 3 has been applied 3 times, and has 2 limit rules.
Description: IPv6Description3
Limit rule list:
Policy Rule Stat Type HiThres LoThres Rate ACL
--------------------------------------------------------------------------------
3 1 Src-Dst 1000 800 0 3010
2 Dst 500 450 0 3001
Application list:
GigabitEthernet2/0/1
Vlan-interface1
Tunnel0
Table 142 Command output
Field
Description
Limit rule list Connection limit policy information.
Policy Number of the connection limit policy.
Rule Number of the connection limit rule.
Stat Type
Statistics types:
• Src-Dst-Port—Limits connections by source IP, destination IP, and
service combination.
• Src-Dst—Limits connections by source IP address and destination IP
address combination.
• Src-Port—Limits connections by source IP and service combination.
• Dst-Port—Limits connections by destination IP and service
combination.
• Src—Limits connections by source IP address.
• Dst—Limits connections by destination IP address.
• Port—Limits connections by service.
• Dslite—Limits connections by B4 device of a DS-Lite tunnel. This type
is not supported on the MSR810-LMS or MSR810-LUS routers.
• --—Limits connections not by a specific IP address or service. All
connections that match the ACL used by the rule are limited.
HiThres Upper limit of the connections.
LoThres Lower limit of the connections.
Rate Number of connections established per second.
ACL Number or name of the ACL used by the rule.
Application list
Application list of the connection limit policy, including interface name and
Global
.
Global
indicates that the connection limit policy is applied globally.
Description Connection limit policy description.
Description list List of connection limit policy descriptions.