EasyManuals Logo

H3C MSR Series Command Reference

H3C MSR Series
1187 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #949 background imageLoading...
Page #949 background image
926
count: Displays only the number of limit rule-based statistics sets. Detailed information about the
specified IPv6 connections is not displayed. If you do not specify this keyword, the command
displays detailed information about the specified IPv6 connections that match connection limit rules.
Usage guidelines
The statistics for connections that match connection limit rules include the following information:
Connection information, including the source/destination IP address, service port, and transport
layer protocol of connections.
Matching connection limit rules.
Number of current connections.
Whether or not new connections can be created.
To further filter the output statistics, specify the following options in the command:
source source-ip.
destination destination-ip.
service-port port-number.
For example, if you specify the source source-ip and destination destination-ip combination, this
command displays statistics about IPv6 connections that match connection limit rules by source IP
address and destination IP address.
If you specify none of the source source-ip, destination destination-ip, and service-port
port-number options, this command displays statistics about all IPv6 connections that match
connection limit rules.
Deleting or modifying an IPv6 connection limit policy will not delete the effective IPv6 connection limit
rule-based statistics sets. An IPv6 connection limit rule-based statistics set will be automatically
deleted after all the IPv6 connections for the set are disconnected.
Examples
# (Centralized devices in standalone mode.) Display statistics about all IPv6 connections that match
the connection limit rule on GigabitEthernet 2/0/1.
<Sysname> display connection-limit ipv6-stat-nodes interface gigabitethernet 2/0/1
Slot 2 :
Src IP address : Any
VPN instance : vpn5
Dst IP address : fe80::5ed9:98ff:feb1:69b6
VPN instance : abcdefghijklmnopqrstuvwxyzabcde
DS-Lite tunnel peer : 9876543210
Service : tcp/12345
Limit rule ID : 12345(ACL: 3184)
Sessions threshold Hi/Lo: 1000000/90000
Sessions count : 150000
Sessions limit rate : 0
New session flag : Permit
# (Centralized devices in standalone mode.) Display statistics about all IPv6 connections that match
the connection limit rule on VLAN-interface 2.
<Sysname> display connection-limit ipv6-stat-nodes interface vlan-interface 2
Slot 2 :
Src IP address : Any
VPN instance : vpn5
Dst IP address : fe80::5ed9:98ff:feb1:69b6
VPN instance : abcdefghijklmnopqrstuvwxyzabcde

Table of Contents

Other manuals for H3C MSR Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C MSR Series and is the answer not in the manual?

H3C MSR Series Specifications

General IconGeneral
CategoryNetwork Router
IPv6 SupportYes
DimensionsVaries by model
WeightVaries by model
Product TypeModular Router
PortsVaries by model
WAN InterfacesVaries by model
FirewallYes
QoSYes
Wireless SupportVaries by model
USB PortsVaries by model
Console PortYes
Power SupplyVaries by model
RedundancyVaries by model
Operating Temperature0°C to 45°C
Storage Temperature-40°C to 70°C
Humidity5% to 95% non-condensing
SeriesMSR
CertificationsCE, FCC, RoHS

Related product manuals