HEADER ATTA CHMEN T/DETACHMENT
4. Slidedrivelineinhook(A)sothatdisc(B)dropsto
secure driveline .
Figure 4.15: Driveline
5. Remove electrical connector (A) and replace cover (B).
6. Push in lock button (C) and pull handle (D) to release
coupler (E).
Figure 4.16: Multicoupler
7. Position coupler (A) onto storage plate (B) on combine.
8. Place electrical connector (C) in storage cup (D).
Figure 4.17: Coupler Storage
147695 205 Revision A
To Next Page
Loading...
