HEADER ATTAC HMENT/D ETACH ME NT
4. Slide driveline in hook (A) so that disc (B) drops to
secure driveline.
Figure 4.92: Driveline
5. Disconnect harness at connector (A).
6. Move handle (B) on combine m ulti-coupler to full open
position to release coupler (C) from combine.
Figure 4.93: Couplers
7. Raise handle (A) on adapter, and place coupler (B) on
adapter receptacle.
8. Lower handle (A) to lock coupler.
Figure 4.94: Adapter Couplers
147695 238 Revision A
To Next Page
Loading...
