MAINTENANCE AND SERVICING
Figure 5.10: Every 250 Hours
A - Upper C ross Auger U-joint and Bearing
13
B - Upper C ross Auger Bearing (2 Places)
C - Reel U-joint (1 Place) D - Flex Linkage (2 Places) - Both Sides
13. U-joint has an extended lubrication c ross and bearing kit. Stop greasing when greasing becomes difficult or if
U-joint stops taking grease. Overgreasing will damage U-joint. Six to eight pumps are sufficient at first grease
(factory). Decrease grease interval as U-joint wears and requires more than six pumps.
147695 264 Revision A
To Next Page
Loading...
