MAINTENANCE AN D SERVICING
Tine Tube Support (If installed) Bushings
20. Position bushing halves (B) on tine tube with flangeless
end adjacent to reel arm, and locate lug in each
bushinghalfinholeintinetube.
21. Slide support (C) onto bushing (B). For the opposite
tine tube, rotate support (C), or slightly move tine tube
so that it clears channels (D).
Figure 5.230: Support
Figure 5.231: Opposite Support
22. Instal
l bushing clamp (A) onto tine tube adjacent to
flangel
ess end of bushing (B).
23. Positi
on clamp (A) on bushings (B) so that edge s
of cla
mp and bushing are flush when clamp fits into
groov
e on bushing and lock tabs are engaged.
Figure 5.232: Bushing Clamp
147695 367 Revision A
To Next Page
Loading...
