NEC Univerge SV9100 - To Change a 2-Digit Programmable Key

1000
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
15-07-01
Programmable Function Keys
Assign the functions of a multiline terminal
Programmable Function Keys.
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
*
00 ~
*
99 (Appearance
Function Code) (Service Code
852 by default)
15-20-01
LCD Line Key Name Assignment
Define the Line Key Name for line keys on
DESILESS terminals.
Maximum of eight digits.
Maximum of 13 characters.
Key Number:
01 ~ 16 (for 16LD TEL)
17 ~ 32 (for 16LD ADM)
LK01 CO001
: :
LK08 CO008
LK09 All Blank
: :
LK48 All Blank
20-06-01
Class of Service for Extensions
Assign Class of Service (1 ~ 15) to extensions.
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
Extension port
101 = Class 15
All other
extension port =
Class 1
20-07-10
Class of Service Options (Administrator
Level) – Programmable Function Key
Programming (Appearance Level)
Turn Off or On an extension user ability to
program the Appearance function keys using
Service Code 852.
When programming a feature as a
Programmable Function Key, refer to Program
15-07-01
0 = Off
1 = On
COS 1 ~ 15 = 1
20-13-18
Class of Service for Options
(Supplementary Service) – Programmable
Function Key Programming (General Level)
Turn Off or On an extension user ability to
program General function keys using Service
Code 851 (by default). (Refer to Program
20-07-10 for Service Code 852.)
0 = Off
1 = On
COS 1 ~ 15 = 1
20-13-49
Class of Service for Options
(Supplementary Service) – BLF Indication
on CO Incoming State
Turn Off or On the BLF Indication on CO
Incoming State.
0 = Off
1 = On
COS 1 ~ 15 = 0
Operation
To change a 2-digit programmable key:
1. Press Speaker.
2. Dial 851 for 2-digit codes.
3. Press the key you want to program.
4. Enter the 2-digit key function, any additional information needed for the key and press Hold.
 For available functions codes refer to Program 15-07 in the UNIVERGE SV9100 Programing Manual.