NEC Univerge SV9100 - Change the Way Your Intercom Call Signals Extension You Are Calling; Enable Forced Intercom Ringing for Your Incoming Intercom Calls; To Enable Handsfree Answerback for Your Incoming Intercom Calls

538
Program
Number
Program Name/Description
Input Data
Default
20-08-10
Class of Service Options (Outgoing Call
Service) – Signal/Voice Call
Enable/Disable an extension user ability to
toggle between Handsfree Answerback and
Forced Intercom Ringing for outgoing Intercom
calls (dial 1 or Service Code 712).
0 = Off
1 = On
COS 1 ~ 15 = 1
20-09-05
Class of Service Options (Incoming Call
Service) – Signal/Voice Call
Turn Off or On an extension user ability to
enable Handsfree Answerback or Forced
Intercom Ringing for their incoming Intercom
calls.
0 = Off
1 = On
COS 1 ~ 15 = 1
Operation
To enable Handsfree Answerback for your incoming Intercom calls:
1. Press idle Speaker.
2. Dial 721.
3. Press Speaker to hang up.
 This disables Forced Intercom Ringing.
To enable Forced Intercom Ringing for your incoming Intercom calls:
1. Press idle Speaker.
2. Dial 723.
3. Press Speaker to hang up.
 This disables Handsfree Answerback.
To change the way your Intercom call signals the extension you are calling:
1. Dial 1.
- OR -
Dial 712.
 If ringing, your call voice-announces. If voice-announced, your call starts to ring the destination. This
option is also available at single line telephones.