NEC Univerge SV9100 - To Answer a Call if You Are Another Extension Ringdown Destination; To Place a Call if Your Extension Has Ringdown Programmed

1021
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
20-06-01
Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to an
extension.
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
Extension port
101 = Class 15
All other
extension port =
Class 1
20-08-01
Class of Service Options (Outgoing Call
Service) – Intercom Calls
Turn Off or On Intercom calling for the
extension.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-08-09
Class of Service Options (Outgoing Call
Service) – Hotline/Extension Ringdown
Turn Off or On Hotline (Ringdown). If disabled
in Class of Service, the settings in Program
21-11 below have no effect.
0 = Off
1 = On
COS 1 ~ 15 = 0
21-01-09
System Options for Outgoing Calls –
Ringdown Extension Timer (Hotline Start)
After the user lifts the handset, the extension
automatically calls the ringdown destination
after this time. A setting of 0 immediately rings
the programmed extension. Any other setting
delays the ringdown the number of seconds
programmed.
0 ~ 64800 seconds
5
21-11-01
Extension Ringdown (Hotline) Assignment
Program the ringdown (Hotline) source and
destination (target) number, up to 24 digits (960
Hotline assignments). Remember to include the
trunk access code (usually 9) in front of the
number when dialing outside numbers. When
programming Speed Dial – System numbers as
the destination, the entry should be #2 + bin
number (the service code for Speed Dialing and
the Speed Dial bin number).
Maximum of 24 digits
0 ~ 9, *, #, Pause, Hook Flash,
@ (Code to wait for answer
supervision)
No Setting
Operation
To place a call if your extension has ringdown programmed:
1. Lift the handset.
 If you want to place a trunk call, press a line key before lifting the handset.
 Depending on the setting of your ringdown timer, you may be able to dial an Intercom call before your
ringdown goes through.
 If the destination has Handsfree Answerback enabled, your call voice announces. If the destination
has Forced Intercom Ringing enabled, your call rings.
To answer a call if you are another extension ringdown destination:
1. Speak toward the telephone to answer the incoming voice announcement.
- OR -
Lift the handset or press Speaker to answer ringing Intercom call.