NEC Univerge SV9100 - Setting up Park and Page for Extension

617
Guide to Feature Programming
Setting Up Park and Page for Extension:
Program
Number
Program Name/Description
Input Data
Default
47-02-09
SV9100 InMail Station Mailbox Options –
Auto Attendant Direct to Voice Mail
Enable/Disable Auto Attendant Do Not Disturb.
When a subscriber enables this option, an
Automated Attendant caller routes directly to
the mailbox. For Subscriber Mailboxes you
should enable this option. For Guest Mailboxes
you should disable this option.
0 = Disable
1 = Enable
0
47-02-14
SV9100 InMail Station Mailbox Options –
Next Call Routing Mailbox
Assign a Next Call Routing Mailbox to the
Subscriber Mailbox. This provides callers with
additional dialing options while listening to a
subscriber Mailbox recording or default
greeting. The digits the caller can dial depend
on the setting of the Next Call Routing Mailbox
and Alternate Next Call Routing Mailbox
options.
1 ~ 32
(default = 1)
By default Call
Routing
Mailboxes
numbers are
01 ~ 08.
47-02-17
SV9100 InMail Station Mailbox Options –
Enable Paging
Enable the paging option for the appropriate
mailbox. This call can also be changed via
telephone in the extension's mailbox options.
0 = Disabled
1 = Enabled
0
47-02-18
SV9100 InMail Station Mailbox Options –
Paging Option
Determine if calls from auto attendant ring the
phone first or go directly to the Park and Page
feature options. This setting can be overridden
by Program 47-02-09.
0 = RNA (Ring No Answer)
1 = Immediately
0