NEC Univerge SV9100 - After You Call an ACI Software Port; To Call an ACI Software Port

46
Operation
To call an ACI software port:
1. Press Speaker.
2. Dial ACI software port extension number.
- OR -
Dial ACI Department Group extension number.
- OR -
Press the One-Touch Key for ACI extension or Department Group.
After you call an ACI software port:
If the port is set for input (Program 33-01-01=1) and a music source is connected, you hear music.
- OR -
If the port is set for output (Program 33-01-01=2) and External Paging is connected, you can page into
the external zone.
- OR -
If the port is set for output (Program 33-01-01=2) and a loud ringer is connected, you activate the loud
ringer.