NEC Univerge SV9100 - To Initiate a Voice over to a Busy Extension

1331
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
11-12-41
Service Code Setup (for System Access) –
Voice Over
Set the service code used for the Voice Over
feature.
To use Service Code 690 for Voice Over,
Program 11-16-08 (Single Digit Service Code Setup
– Voice Over) must be undefined.
MLT
0 ~ 9,
*
, # Maximum of eight
digits
890
11-16-08
Single Digit Service Code Setup – Voice
Over
Set the Service code used for the Voice Over
feature.
0 ~ 9,
*
, # Maximum of one digit
6
15-07-01
Programmable Function Keys
Assign a function key for Voice Over (code 48).
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
*
00 ~
*
99 (Appearance
Function Code) (Service Code
852 by default)
20-06-01
Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to an
extension.
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
Extension port
101 = Class 15
All other
extension port =
Class 1
20-13-06
Class of Service Options (Supplementary
Service) – Automatic Off-Hook Signaling
(Automatic Override)
Allow a busy extension to Manually (0) or
Automatically (1) receive off-hook signals.
This setting is to receive incoming call
signaling information during call queuing.
0 = Off
1 = On
COS 1 ~ 15 = 1
21-01-03
System Options for Outgoing Calls – Trunk
Interdigit Time (External)
Program the time an extension must wait
before using the Voice Over feature can be
used on a call (this time expires before putting a
call in a talk state). This time also affects
Barge-In.
0 ~ 64800 seconds
5
Operation
To initiate a Voice Over to a busy extension:
1. Press Voice Over key (Program 15-07 or SC 851: 48)
- OR -
Dial 8.
- OR -
Dial 890.
 You hear an alert tone and the Voice Over key flashes. You can talk to the called party after the alert
tone ends.