NEC Univerge SV9100 - Release 8.0 Enhancement

1092
Release 8.0 Enhancement
Software Release 8.0 includes an enhancement to generate SNMP traps when programming
changes are detected.
In the case that a programming change to the SV9100 is detected the following information is output
as variable bindings to the SNMP manager.
OID
Name
Description
1.3.6.1.4.1.14399.20.10.30.2.6.101
Site IP Address(SD Change)
SV9100 IP Address
The PRG10-12-09 value is set.
1.3.6.1.4.1.14399.20.10.30.2.6.102
PRG Number(SD Change)
The changed PRG number is set.
In case of TelPro or Service Code or WebPro or XMLPro
The format is XX-XX-YY.
In case of PCPro
The format is “XX-XX”.
1.3.6.1.4.1.14399.20.10.30.2.6.103
Method(SD Change)
The change operation is set.
TelPro or Service Code or WebPro or PCPro or XMLPro
1.3.6.1.4.1.14399.20.10.30.2.6.104
Source IP Address(SD Change)
In case of WebPro or PCPro or XMLPro
The IP Address of PC side is sent.
1.3.6.1.4.1.14399.20.10.30.2.6.105
User(SD Change)
In case of WebPro or PCPro or XMLPro
The user name of PRG90-02 is sent
In case of TelPro or Service Code
The extension number is set
Changed PRG format is following.
The PRG24-09-01 of extension 200 is changed by service code
24-09 : Call Forwarding Fixed Setting, 01-Call Forwarding Type, ICM Extension200
The Value of 11-10 is changed by PCPro
SNMP Manager
(MasterScope)
SNMP Agent
(SV9100)
Trap
1.3.6.1.4.1.14399.20.10.30.2.6.101 : 172.16.0.10
1.3.6.1.4.1.14399.20.10.30.2.6.102 : 11-10
1.3.6.1.4.1.14399.20.10.30.2.6.103 : PCPro
1.3.6.1.4.1.14399.20.10.30.2.6.104 : 172.16.0.40
1.3.6.1.4.1.14399.20.10.30.2.6.105 : tech
Configuration
Change