1212
TAPI Compatibility
Description
The system has Telephony Applications Programming Interface (TAPI) compatibility that provides:
Reduced TAPI Feature Set (see the Supported TAPI Commands chart below)
Caller ID data to the PC for data base lookups and screen pops (see the Caller ID Data chart
below)
Telephone control (Off-Hook, On-Hook and dialing)
The 1st-Party TAPI Ethernet Driver provides an interface that allows the user personalized control of the
telephone system from a desktop or laptop PC when used in conjunction with a TAPI-compliant
application. The telephone system and PC are connected by installing an adapter on the telephone
multiline terminal, allowing the PC user to access sophisticated communications services via the
telephone lines.
Conditions
Does not support the Cordless DTL-8R-1 terminal.
The Override function for IP multiline terminals and Softphones is supported.
The Bluetooth Cordless Handset (BCH) is not a supported terminal when using 1st-Party
CTI, 3rd-Party CTI, or with the Desktop Suite.
A maximum of 256 1st-Party CTI over Ethernet connections is supported. Any Desktop
Application connection takes away from the 256 maximum connections.
Caller ID and Call status are available from the TAPI interface functions.
Only one 3rd-Party CTI connection to the SV9100 is supported.
Refer to TAPI Commands for a list of supported TAPI commands.
The TAPI Compatibility feature does not support CAP keys 4000~9999. Only 0001~3999
can be supported.
DID name information of analogue trunk type will not be sent by TSP.
SOAI and 3rd Party CTI can be used at the same time in the system.
TAPI Commands
To Next Page
Loading...
