NEC Univerge SV9100 - Page 1213

1213
TAPI Commands (Continued)
lineGetDevConfig
lineDevSpecific
lineGetIcon
lineDial
lineGetID
lineDrop
lineInitializeEx
lineForward
lineNegotiateAPIVersion
lineHold
lineNegotiateExtVersion
lineMakeCall
lineRemoveProvider
linePark
lineSetDevConfig
linePickup
lineShutdown
linePrepareAddToConference
lineClose
lineRedirect
lineDeallocateCall
lineRemoveFromConference
lineGetAddressStatus
lineSetupConference
lineGetCallInfo
lineSetupTransfer
lineGetCallStatus
lineSwapHold
lineGetLineDevStatus
lineUncompleteCall
lineOpen
lineUnhold
lineSetAppSpecific
lineUnpark
lineSetLineDevStatus
lineGatherDigits
lineSetMediaMode
lineGenerateDigits
lineSetStatusMessages
lineGenerateTone
lineMonitorDigits
When SOAI (Simplified OAI, used by DT Plusware) and 3rd Party TAPI (i.e. Desktop
Applications Shared Services) are used in the same system, the following limitations apply
to only the SOAI application.
Multiple Call Handling (Operator Terminal, Call Queuing, etc.) is not supported for extensions
controlled by SOAI.
SOAI controlled extensions cannot be the destination for Call Forward Both Ring or Tandem
Ringing.
SOAI controlled extensions cannot have direct CO line keys (852: *01).
SOAI controlled extensions do not support Park Holding.
SOAI controlled extensions cannot be used with the Mobile Extension feature.
CCIS Link Reconnect is not supported when SOAI and 3rd Party TAPI are used in the same
system.
Default Settings
Disabled
System Availability