NEC Univerge SV9100 - To Cancel All Your Messages Waiting; To Cancel the Messages Waiting You Have Left at a Specific Extension; To Check Your Messages

864
Press the Message Waiting key (Program 15-07 or SC 851: 38).
- OR -
At the single line telephone, lift the handset and dial 841.
 If the called extension does not answer, dial 0 or press your Message Waiting key to automatically
leave them a message.
 Normally, your Message Waiting LED goes out. If it continues to flash, you have new messages in your
Voice Mail mailbox or a new General Message. See “To check your messages” below.
To cancel all your Messages Waiting:
This includes messages you have left for other extensions and messages other extension have left for you.
1. At the multiline terminal, press Speaker.
- OR -
At the single line telephone, lift the handset.
2. Dial 873.
3. Hang up.
To cancel the Messages Waiting you have left at a specific extension:
1. At the multiline terminal, press Speaker.
- OR -
At the single line telephone, lift the handset.
2. Dial 871.
3. Dial the number of the extension you do not want to have your messages.
4. Hang up.
To check your messages:
1. Press Message key or the MW (Message Waiting) softkey.
2. Dial * 0 .
You can have any combination of the message types in the table below on your telephone.