NEC Univerge SV9100 - To Use Dial Number Preview to Place a Call (Multiline Terminal Only)

342
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
20-06-01
Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to
extensions.
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
Extension port
101 = Class 15
All other
extension port =
Class 1
20-08-05
Class of Service Options (Outgoing Call
Service) – Dial Number Preview (Preset Dial)
Turn Off or On an extension user ability to use
Dial Number Preview.
0 = Off
1 = On
COS 1 ~ 15 = 1
Operation
To use Dial Number Preview to place a call (multiline terminal only):
1. Do not lift the handset or press Speaker.
2. Dial
*
.
 Skip to step 3 if a VRS or InMail is not installed.
3. To preview any number, dial the number you want to call.
To preview a Speed Dial – System/Group number, press Redial and dial the
Speed Dial – System/Group bin number you want to call.
 The number is displayed.
4. To dial out the displayed trunk number, press a Line/Trunk Group key.
 If the previewed number as a trunk access code (e.g., 9), you can press Speaker instead.
- OR -
To dial an Intercom number, press Speaker.
- OR -
To cancel the number without dialing it out, press Hold.