NEC Univerge SV9100 - Answering a Trunk Call from Your DSS Console; Calling an Extension from Your DSS Console

401
Program
Number
Program Name/Description
Input Data
Default
30-05-16
DSS Console Lamp Table – Hotel Status
Code 8 (Hotel DSS)
Define the LED patterns for hotel status code 8
on the DSS consoles.
0 ~ 7
4 (IR)
30-05-17
DSS Console Lamp Table – Hotel Status
Code 9 (Hotel DSS)
Define the LED patterns for hotel status code 9
on the DSS consoles.
0 ~ 7
3 (RW
30-05-18
DSS Console Lamp Table – Hotel Status
Code 0 (Hotel DSS)
Define the LED patterns for hotel status code 0
on the DSS consoles.
0 ~ 7
0 (Off)
30-05-19
DSS Console Lamp Table – Hotel Status
Code * (Hotel DSS)
Define the LED patterns for hotel status code *
on the DSS consoles.
0 ~ 7
4 (IR)
30-05-20
DSS Console Lamp Table – Hotel Status
Code # (Hotel DSS)
Define the LED patterns for hotel status code #
on the DSS consoles.
0 ~ 7
5 (IL)
30-05-21
DSS Console Lamp Table – VM Message
Indication
Define the LED patterns for VM message
indications on the DSS consoles.
0 ~ 7
3 (RW)
30-10-01
DSS Console IP Terminal Setup – MAC
Address
Read Only program that displays the MAC
address of the IP terminal associated with a
DSS console.
00-00-00-00-00-00 ~ FF-FF-FF-
FF-FF-FF
00-00-00-00-00-
00
Operation
Calling an extension from your DSS Console:
1. Press the DSS Console key.
 If the call voice-announces, you can make it ring by dialing 1.
 If you do not have Handsfree, you must lift the handset to speak.
Extension Busy Lamp Field
When the DSS key is...
On
Off
Flashing Fast
The assigned extension is...
Busy on a call
Idle
In Do Not Disturb
Answering a trunk call from your DSS Console:
1. Press the flashing DSS Console key assigned to the trunk.
 If you do not have Handsfree, you must lift the handset to speak.