868
Migration – SV8100
Description
The Migration – SV8100/SV8300 feature allows a UNIVERGE SV8100 database to be converted to a
SV9100 database to utilize the enhanced capabilities of the SV9100.
Older telephones on new systems may be compatible but will have certain limitations depending
on installation
and feature usage. Such limitations cannot be listed due to site specific usage.
NEC always recommends
migrating to the telephones advertised as compatible for specific
systems.
Conditions
The Migration – SV8100/SV8300 feature is available with Version 1000 or higher.
Refer to the SV9100 System Hardware Manual for a complete list of supported packages.
Hardware Migration license (0048) is required to migrate SV8100 hardware to the SV9100.
SV8100 licenses will not migrate.
After an SV8100 to SV9100 database conversion there will be no VoIP Daughter Board and
GCD-CP10 present.
InMail messages and recordings will not migrate.
SV8100 UC Desktop Suite and Softphone will not migrate.
When migrating from SV8100 to SV9100, the InMail auto programs to use Department
Group 64. For example, if Department Group 64 was previously being used on the SV8100
for UM8000, the UM8000 will need to be re-programmed to use a different Department
Group.
To Next Page
Loading...
