NEC Univerge SV9100 - To Activate or Deactivate Do Not Disturb While Your Extension Is Idle

422
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
11-11-08
Service Code Setup (for Setup/Entry
Operation) – Do Not Disturb
Assign Service Code for DND.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
847
11-12-01
Service Code Setup (for Service Access) –
Bypass Call
Assign Service Code for DND.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
807
11-16-06
Single Digit Service Code Setup – DND/Call
Forward Override Bypass
If a single digit service code is to be used,
assign an available code number.
0 ~ 9,
*
, # Maximum of one digit
No Setting
15-07-01
Programmable Function Keys
Assign functions to multiline terminal line keys
(DND = 03).
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
*
00 ~
*
99 (Appearance
Function Code) (Service Code
852 by default)
20-06-01
Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to an
extension.
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
Extension port
101 = Class 15
All other
extension port =
Class 1
20-09-13
Class of Service Options (Incoming Call
Service) – DND Active While Ringing
Assign when the DND will be enforced (set at
same time a call is ringing or for next call).
0 = Immediate
1 = Next
COS 1 ~ 15 = 0
Program
Number
Program Name/Description
Input Data
Default
20-13-04
Class of Service Options (Supplementary
Service) – Call Forward/DND Override
(Bypass Call)
Turn Off or On an extension user ability to use
Call Forwarding/DND Override.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-13-40
Class of Service Options (Supplementary
Service) – Do Not Disturb
Turn Off or On an extension user ability to set or
cancel Do Not Disturb.
0 = Off
1 = On
COS 1 ~ 15 = 1
Operation
To activate or deactivate Do Not Disturb while your extension is idle:
Multiline Terminal Using Softkeys
1. Do not lift handset.