434
Power Off for the Entire Power Save Group
1.
Press Speaker and dial (Service Code 731).
2.
Dial 00, Entire Group
3.
Dial 1, Power Off
4.
Enter the Password (Default: 0000)
Power supply to the system is cut when all terminals of Entire Power Save Group are in an Idle state.
Password is set in Program 90-02-02 (User ID3).
5.
Press Speaker to set Power Off for Entire Power Save Group.
Power On for the Entire Power Save Group
1.
Press Speaker and dial (Service Code 731).
2.
Dial 00, Entire Group
3.
Dial 0, Power On
4.
Press Speaker to set Power On for Entire Power Save Group.
Settings Using Function Keys
Power Off for Power Save Group 2
1.
Assign Power Save key (SC851 code #06) with additional data 02.
2.
Press the Power Save key.
3.
Enter the Password (set in Program 90-02-02 User ID3).
4.
The key turns red.
Power On for Power Save Group 2
1.
Assign Power Save key (SC851 code #06) with additional data 02.
2.
Press the Power Save key.
3.
The key is turned Off.
Power Off for the Entire Power Save Group
1.
Assign Power Save key (SC851 code #06) with additional data 00.
2.
Press the Power Save key.
3.
Enter the Password (set in Program 90-02-02 User ID3).
4.
The key turns red.
To Next Page
Loading...
