435
Power On for the Entire Power Save Group
1.
Assign Power Save key (SC851 code #06) with additional data 00.
2.
Press the Power Save key.
3.
The key is turned Off.
Power Saving Mode
< Program >
Program 15-02-18: TEL 200: 1
Program 20-02-10: 1 minute
1.
Idle state at TEL200.
2.
One minute later, LED areas highlighted in red darken at TEL200.
Multiline Terminal Darkens
Power Failure Saving Mode
Set Program 15-27-02 to 1 for extensions to have the power cut when the system losses power and runs
on battery backup.
Example
< Program >
Program 15-27-02:
TEL 101: set to a 1
TEL 102: set to a 1
TEL 103: set to a 0
TEL 104: set to a 0
TEL 101 TEL 102 will be powered Off when a power failure occurs.
To Next Page
Loading...
