NEC Univerge SV9100 - To Make an Internal Page Announcement

960
Operation
To make an Internal Page announcement:
Multiline Terminal
1. Press the zone Internal Paging key (Program 15-07 or SC 851: 21 + 0 or 1~9 or 01~64 for
zones (0 or 00 for All Call).
- OR -
Press Speaker or lift the handset.
2. Dial 801 and the Paging Zone number (0~9 or 00~64).
 Dialing 0 or 00 calls All Call Internal Paging.
- OR -
Dial *1 and the Combined Paging Group code 1~8 or 0 (for Internal/External All Call).
 Display indicates the Combined Paging as an External Page.
 If the Internal Page Zone is busy or if there are no extensions in a page group, the page is announced
as an External Page only.
3. Make an announcement.
4. Press Speaker to hang up.
Single Line Telephone
1. Lift the handset.
2. Dial 801 and the Paging Zone number (0~9 or 00~64).
 Dialing 0 or 00 calls All Call Internal Paging.
 Dial *1 and the Combined Paging Group code 1~8 or 0 (for Internal/External All Call).
3. Make an announcement.
4. Hang up.