NEC Univerge SV9100 - Chapter 11 NAPT; Section 1 NAPT; Section 2 Conditions; Section 3 Restrictions - Static NAT

11
Features
SECTION 1 ABOUT THIS CHAPTER
This chapter provides an alphabetical listing of the features that are available
with the UNIVERGE SV9100 system.
Each feature provides the following information:
Description – briefly describes the feature and how it is used.
Conditions – provides special operating conditions (if any) that need to be
considered with using the feature.
Default Settings – indicates the factory default setting (if any).
System Availability – describes multiline terminals that can be used with
this feature and lists any additional equipment, such as adapters or blades,
that must be installed for this feature to operate.
Programming – lists the memory blocks that support the feature.
Related Features – lists features that are associated with the feature being
described (e.g., the Account Codes feature lists the Speed Dialing feature in
the related features list because speed dialing bins can contain stored
account code (if any).
Operation – provides step-by-step instructions for using the feature.