NEC Univerge SV9100 - Setting up Park and Page for a Group Mailbox

618
Setting Up Park and Page for a Group Mailbox:
Program
Number
Program Name/Description
Input Data
Default
47-06-07
Group Mailbox Subscriber Options – Auto
Attendant Do Not Disturb
Enable/Disable Auto Attendant Direct to VM.
When enabled, an Auto Attendant caller routes
directly to the mailbox, hears the greeting, and
is asked to leave a message. A subscriber can
enable this option while recording their mailbox
greeting.
0 = Disable
1 = Enable
0
47-06-12
Group Mailbox Subscriber Options – Next
Call Routing Mailbox
Assign a Next Call Routing Mailbox to the
Subscriber Mailbox. This provides additional
dialing option while listening to a Subscribe
Mailbox recording or default greeting. The digits
the caller can dial depends on the setting of the
Next Call Routing Mailbox or alternate Next Call
Routing Mailbox options.
1 ~ 32
(default = 1)
By default Call
Routing
Mailboxes
numbers are
01 ~ 16.
47-06-15
Group Mailbox Subscriber Options – Enable
Paging
Enable the paging option for the appropriate
Group Mailbox. This call can be changed via
telephone in the extension mailbox options.
0 = Disable (No)
1 = Enable (Yes)
0
47-06-16
Group Mailbox Subscriber Options – Paging
Option
Determine if calls from auto attendant ring the
Group first or go directly to the Park and Page
feature options. This setting can be overridden
by Program 47-06-07.
0 = RNA (Ring No Answer)
1 = Immediate
0