NEC Univerge SV9100 - Inmail SMTP Setup

37
Program
Number
Program Name/Description
Input Data
Default
90-11-10
System Alarm Report – From Address
When Alarm Reports are to be emailed, set this
email address for the station sending the report.
Maximum of 255 characters
No Setting
90-11-11
System Alarm Report – DNS Primary
Address
When Alarm Reports are to be emailed, set the
DNS primary address.
0.0.0.0 ~ 255.255.255.255
0.0.0.0
90-11-12
System Alarm Report – DNS Secondary
Address
When Alarm Reports are to be emailed, set the
DNS secondary address.
0.0.0.0 ~ 255.255.255.255
0.0.0.0
90-11-13
System Alarm Report – Customer Name
When Alarm Reports are to be emailed, enter a
name to identify the particular system.
Maximum of 255 characters.
No Setting
90-25-01
System Alarm Report CC Mail Setup – CC
Mail Address
Define the mail address to receive the system
alarm report CC Mail setup.
Maximum of 255 characters
No Setting
90-50-01
System Alarm Display Setup – System
Alarm Display Telephone
Define the extension number that Alarm
Reports are displayed on.
Maximum of eight digits
No Setting
InMail SMTP Setup:
Program
Number
Program Name/Description
Input Data
Default
47-18-01
InMail Setup – SMTP Enabled
Enables the SMTP forwarding feature for the
system.
0 = No
1 = Yes
0
47-18-02
InMail Setup – Server Name
Sets the SMTP server name. If the DNS server
setting is not assigned in Program 90-11-11, the
IP Address must be used instead of the name.
Maximum of 48 characters
No Setting
47-18-03
InMail Setup – SMTP Port
Sets the SMTP server port.
0 ~ 65535
25
47-18-04
InMail Setup – Encryption
Enable SSL Encryption.
0 = No
1 = Yes
0
47-18-05
InMail Setup – Authentication
Enables authentication, when set to 2 (POP3)
refer to Programs 47-19-xx.
0 = No
1 = Yes
3 = POP3
0
47-18-06
InMail Setup – User Name
Set the user name for SMTP authentication.
Maximum of 48 characters
No Setting