1090
Operation
Using the MIB File Example
When the MIB file has been loaded into an SNMP application, it can send requests to the SV9100 and
the SV9100 will send a response back. The request is made up from information available in the MIB
file. Refer to SNMP – Hardware Key Code Request and SNMP – CPU IP
Address Request for two
examples of how these requests and responses are processed in regards to
the hardware key code
and the CPU IP address.
First, the SNMP user can make a request in the application to retrieve the hardware key code. This
request is received by the SV9100 and in turn sends back the hardware key code via SNMP.
SNMP – Hardware Key Code Request
Similarly, the SNMP user can make a request for the CPU IP address. This is received and sent back
via SNMP.
SNMP – CPU IP Address Request
To Next Page
Loading...
