1380
Components of the Wireless DECT (SIP) system include the following:
Example DECT Handset Features
The handset has the following features:
Alphanumeric Display with Backlight
LED Indication for Incoming Calls
Telephone Book with 40 entries
While idle, dial the number to be stored, then press > and OK. Enter the name
associated with the
number using the dial pad, and press OK.
Silent Mode (mute all sounds)
Redial Function (last 10 numbers)
Press ▲ and continue to press ▼ to scroll through the numbers. Press Hook key to
dial a
number.
Programming Pause
A long press on # adds a pause to pre-dial or phone book numbers.
Adjustable Volume
Ring volume can be adjusted using ▲ and ▼ on the handset.
Key Lock
Press OK and * to lock the dial pad.
Ten Different Ring Tones
Ring tones can be selected in the tone setup menu and press OK.
Microphone Mute
Press
while the telephone is off-hook to mute the microphone.
Caller ID Presentation
Headset Connection
R-Key for Transfer and Special
Services
When off-hook, press
R to Recall, transfer.
Display Enhancements
The SIP DECT handset can now receive the calling party name on an incoming
internal/external call.
The priority for the display is as follows:
If calling from a standard SIP terminal:
1.
Program 15-05-04 nick name.
2.
Program 15-01-01 extension name.
3.
Calling name from originating standard SIP caller.
4.
Extension number.
To Next Page
Loading...
