EasyManua.ls Logo

NEC Univerge SV9100 - Changing VRS Messages Using User Admin Mode (UA)

NEC Univerge SV9100
1402 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1360
Troubleshooting
The table below shows possible Error messages and Causes:
Error Messages and Causes
Error Message Cause
Mailbox XXX does not exist.
(XXX = mailbox number)
The mailbox does not exist
The mailbox is being used by another
session
When the mailbox is being used by another session, either PC or
telephone.
There is no available space in the SD.
When there is no available space in the SD.
The file is being used by another session.
Please try again later.
When the file to be downloaded is being used by another
session, either PC or telephone.
The selected file has already been deleted.
When the file selected for download has already been deleted.
The file is being used by another session.
Please try again later.
When the file selected for deletion is being used by another
session.
The selected file has already been deleted.
When the file selected for deletion has already been deleted.
Cannot upload the file since the original file
is being used by another session. Please try
again later.
When the file to be replaced is being used when trying to upload
the replacement.
Operation
Changing VRS Messages using User Admin Mode (UA)
Audio files up to 1MB may be uploaded to the SV9100 for VRS messages. All 100 VRS
messages can
be uploaded or deleted. The messages can be used on all VRS features:
General Message, Automated
Attendant greetings, messages and the 900 Preamble.
In order for uploaded messages to play they must be in the proper format. Audio files not
recorded in the
proper format may not playback. The proper format is:
Bit Rate 64kbps
Sampling Size 8 bits
Channel
1 (Mono)
Sampling Rate 8 KHz
Audio Format CCiTT u-law
1.
To login, open an Internet browser and enter the IP of the SV9100 LAN port in the
address line.
At default, the IP address is 192.168.0.10.
2.
At the login screen enter username = USER1 and password = 1111.
3.
You will then see the main menu, click on the VRS Audio Up/Download icon.

Table of Contents

Other manuals for NEC Univerge SV9100

Related product manuals