NEC Univerge SV9100 - To Cancel Call Forward - both Ring at a Forwarding Station; To Set Call Forward - both Ring at a Forwarding Station

148
- OR -
At the multiline terminal only, press the Call Forwarding Programmable Function keys.
(Program 15-07-01, 13 or SC 851, Key Code 13)
3. Dial 0 (Cancel).
4. Press Speaker or hang up.
 The Call Forwarding Programmable Function Key turns off.
To set Call Forward – Both Ring at a forwarding station:
1. Pick up the handset or press Speaker.
2. Dial the Call Forward – Both Ring Service Code (default: 845).
- OR -
At the multiline terminal only, press the Call Forwarding Programmable Function keys.
(Program 15-07-01, 14 or SC 851, Key Code 14)
3. Dial 1 (Set).
4. Dial the destination extension number.
5. Press Speaker or hang up.
 The Call Forwarding Programmable Function Key turns on.
To cancel Call Forward – Both Ring at a forwarding station:
1. Pick up the handset or press Speaker.
2. Dial the Call Forward – Both Ring Service Code (default: 845).
- OR -
At the multiline terminal only, press the Call Forwarding Programmable Function keys.
(Program 15-07-01, 14 or SC 851 Key Code 14)
3. Dial 0 (Cancel).
4. Press Speaker or hang up.
 The Call Forwarding Programmable Function Key turns off.