NEC Univerge SV9100 - To Answer a Call from Your Hotline Partner; To Place a Call to Your Hotline Partner; To Transfer Your Outside Call to Your Hotline Partner

569
Program
Number
Program Name/Description
Input Data
Default
30-05-21
DSS Console Lamp Table – VM Message
Indication
Define the LED patterns for VM message
indication on the DSS consoles.
0 ~ 7
3 (RW)
Extension Busy Setup
Program 20-13-06
Program 20-02-03
BLF
1
Status
Busy Status
1
1
0
Off
No
2
1
1
On
Yes
3
0
0
On
Yes
4
0
1
On
Yes
1
BLF is on for extension receiving a voice announced Intercom call.
Operation
To place a call to your Hotline partner:
1. Press the Hotline key (Program 15-07 or SC 851: 01 + partner’s extension number).
 You can optionally lift the handset after this step for privacy.
To transfer your outside call to your Hotline partner:
1. Press the Hotline key.
2. Announce the call and hang up.
- OR -
Hang up to have the call wait at your Hotline partner unannounced.
 If unanswered, the call recalls like a regular transferred call.
To answer a call from your Hotline partner:
1. If you hear two beeps, speak toward the telephone.
- OR -
If your telephone rings, lift the handset.