NEC Univerge SV9100 - Power off for Power Save Group 2; Power on for Power Save Group 2

433
The power to TEL 101 and TEL 102 cuts at night.
Automatic Night Service
Settings Using Service Codes
< Program >
Program 15-27-01:
TEL 101: Power Save Group 2
TEL 102: Power Save Group 2
Power Off for Power Save Group 2
1. Press Speaker and dial (Service Code 731).
2. Dial 02, Group 2
3. Dial 1, Power Off
4. Enter the Password (Default: 0000)
 Power supply to the system is cut when all terminals of Power Save group 2 are in an Idle state.
 Password is set in Program 90-02-02 (User ID3).
5. Press Speaker to set Power Off for Power Save Group 2.
Power On for Power Save Group 2
1. Press Speaker and dial (Service Code 731).
2. Dial 02, Group 2
3. Dial 0, Power On
4. Press Speaker to set Power On for Power Save Group 2.