28
Alarm Reports
Description
The UNIVERGE SV9100 system logs various errors and reports information about the operation that
can be used to determine the cause of a problem. The system can indicate several errors on the
multiline telephone display, output to a USB stick on the GCD-CP10, or be downloaded in PCPro. The
report data also can be sent via email.
Alarm Report
The Alarm Reports indicate:
System start-up/upgrade date and time
Blade communication error with date and time and the restoration date and time
Date and time a blade was removed from the system
Date and time an extension was disconnected from the system
Date and time of any system data change
Sample Alarm Report
<< Alarm Report 05/16/2006 14:30 PAGE 001
LVL NO STAT DATE TIME ITEM UNIT SLT PRT
PARAMETER
To Next Page
Loading...
