NEC Univerge SV9100 - Dial Access Codes that Require GCD-CP10 Hotel License

552
The Message Waiting status of a room cannot be seen when the console is in Wake Up
Call or Room Status mode.
The BLF indication for each room is always available no matter what mode the console is
assigned.
The quantity of VRS channels available for Wake up call is determined by the quantity of
VRS channel licenses installed. Ther are 2 cannels built in, up to 16 are available by adding
the VRS Channel license BE114082. The VRS channels provided by the IPLE card (if
installed) can not be used for Wake up calls.
The Hotel/Motel feature requires the GCD-CP10 be licensed for Hotel. The following dial
access codes can be used only if the GCD-CP10 is licensed for the Hotel/Motel Feature:
Program
Dial Access Code
Description
11-10-16
726
Leaving Message Waiting (Requires CPU to be
licensed for Hotel/Motel)
11-14-01
727
Set DND for Own Extension
11-14-02
728
Cancel DND for Own Extension
11-14-03
729
Set DND for Other Extension
11-14-04
730
Cancel DND for Other Extension
11-14-05
731
Set Wake Up Call for Own Extension
11-14-06
732
Cancel Wake Up Call for Own Extension
11-14-07
733
Set Wake Up Call for Other Extension
11-14-08
734
Cancel Wake Up Call for Other Extension
11-14-09
735
Set Room to Room Call Restriction
11-14-10
736
Cancel Room to Room Call Restriction (Hotel)
11-14-11
737
Change Toll Restriction Class for Other Extension
11-14-12
738
Check In
11-14-13
739
Check Out
11-14-14
740
Room Status Change for Own Extension
11-14-15
741
Room Status Change for Other Extension
11-14-16
742
Room Status Output
11-14-17
770
Hotel Room Monitor
11-14-18
766
Set Hotel PMS Code Restriction
Dial Access Codes that Require GCD-CP10 Hotel License