NEC Univerge SV9100 - Firmware Compatibility Matrix; Terminal and Line Key;Lcd Compatibility (DT300;DT700)

1184
Firmware Compatibility Matrix
BCH-L Unit Lot Number
xxxDxx or lower xxxExx or higher
Terminal
Lot
Number
DT-330
xxx I xx or lower
(Version 8.10 and 1, E0 or lower)
Supported
Supported
xxxJxx or higher
(Version 2.20 or higher)
Not supported
Supported
BCH Support may differ based on terminal firmware. To verify both DT-330 terminal and BCH-L Unit
firmware, hold down keypad buttons 1, 2 and 3 while plugging the line cord into the terminal.
Terminal and Line Key/LCD Compatibility (DT300/DT700) and Terminal and Line
Key/LCD Compatibility (DT400/DT800) show the compatibility between the terminals
and Line Key or LCD used in the system.
Terminal and Line Key/LCD Compatibility (DT300/DT700)
Line Key/LCD
Terminal
8 LK-L 8LKD(LD)-L 8LKI(LD)-L 12LK-L LCD (BL)-L DCL-60
Digital Terminals: DT300
DTL-2E-1 (BK) TEL
—
—
—
—
—
—
DTL-6DE-1 (BK) TEL
—
—
—
—
—
—
DTL-12E-1 (BK) TEL
—
—
—
—
—
—
DTL-8LD(BK)/(WH) TEL

—
—
—
—

DTL-12BT-1 (BK) TEL


—



DTL-12D-1 (BK)/(WH) TEL


—



DTL-12PA-1 (BK) TEL


—



DTL-24D-1 (BK)/(WH) TEL


—
—


DTL-32D-1 (BK)/(WH) TEL


—
—


IP Terminals: DT700
ITL-2E-1 (BK) TEL
—
—
—
—
—
—
ITL-6DE-1 (BK) TEL
—
—
—
—
—
—
ITL-8LDE-1 (BK) TEL
—
—
—
—
—
—
ITL-8LD-1 (BK)/(WH) TEL

—
—
—
—
