NEC Univerge SV9100 - Trunk-To-Trunk Forwarding - Normal (0) Trunks

161
Program
Number
Program Name/Description
Input Data
Default
24-09-06
Call Forward Split Settings – Call
Forwarding Destination for CTX/PBX for All
Call, No Answer
Assign Call Forwarding destination numbers for
CTX/PBX for all call and no answer.
Maximum of 24 digits (0 ~ 9,
*
,
#, @, P, R)
@ = Wait for Answer
Supervision - ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
No Setting
24-09-07
Call Forward Split Settings – Call
Forwarding Destination for CTX/PBX for
Busy
Assign Call Forwarding destination numbers for
CTX/PBX for busy.
Maximum of 24 digits (0 ~ 9,
*
,
#, @, P, R)
@ = Wait for Answer
Supervision - ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
No Setting
25-07-07
System Timers for VRS/DISA – Long
Conversation Warning Tone Time
Determine the time a DISA caller or any
Trunk-to-Trunk (such as Tandem Trunking)
conversation can talk before the Long
Conversation tone is heard.
0 ~ 64800 seconds
3600
25-07-08
System Timers for VRS/DISA – Long
Conversation Disconnect Time
Determine how long the system waits before
disconnecting a DISA or any trunk-to-trunk
(such as Tandem Trunking) call after the Long
Conversation tone is heard.
0 ~ 64800 seconds
10
Trunk-to-Trunk Forwarding – Normal (0) Trunks:
Program
Number
Program Name/Description
Input Data
Default
11-10-06
Service Code Setup (for System
Administrator) – Setting the Automatic
Transfer for each Trunk Line
Customize the service code to be used to set
the Automatic Trunk Forwarding feature.
MLT
0 ~ 9,
*
, # Maximum of eight
digits
833
11-10-07
Service Code Setup (for System
Administrator) – Canceling the Automatic
Transfer for each Trunk Line
Customize the service code to be used to
cancel the Automatic Trunk Forwarding feature.
MLT
0 ~ 9,
*
, # Maximum of eight
digits
834
11-10-08
Service Code Setup (for System
Administrator) – Setting the Destination for
Automatic Trunk Transfer
Customize the service code to be used to set
the destination for the Automatic Trunk
Forwarding feature.
MLT
0 ~ 9,
*
, # Maximum of eight
digits
835