EasyManua.ls Logo

NEC Univerge SV9100 - To Answer a 900 Preamble Call; To Check the Extension Number of any Multiline Terminal

NEC Univerge SV9100
1402 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1354
3.
Dial the function you want.
7 = Record
5 = Listen
3 = Erase
If you dialed 7 to record, press # to end the recording.
If you dialed 5 to listen, you can dial 5 to listen to the message again.
To Record the General Message again, go back to step 1.
If you dialed 3 to erase the General Message, you must go to step 4 (hang up). To
cancel without
erasing on a multiline terminal, press HOLD instead and go back to
step 1.
4.
Hang up when you are done.
Time, Date and Station Number Check
To check the extension number of any multiline terminal:
1.
Do not lift the handset or press Speaker.
2.
Dial 6 for extension number.
To check the system time and date from any multiline terminal extension:
1.
Do not lift the handset or press Speaker.
2.
Dial 8 for time and date.
900 Preamble
To answer a 900 Preamble call:
1.
Answer the ringing call.
The line key or Call Appearance (CAP) key turns solid red as the system plays the
preamble to the
caller.
2.
When you hear two beeps and the line key turns green, converse with the caller.

Table of Contents

Other manuals for NEC Univerge SV9100

Related product manuals