1369
Warning Tone for Long Conversation
Description
W
The system can broadcast warning tones to a trunk caller, warning the caller that he
has been on the call too long. If he chooses, the caller can disregard the tones and
continue talking. The
outside caller does not hear the warning tones. Warning tones do not
occur for Intercom calls and
most incoming trunk calls. DISA trunks can also have warning
tones. Warning tones are not
available to analog single line telephone (SLT) users.
There are two warning tones: Alarm Tone 1 and Alarm Tone 2. Alarm
Tone 1 is the first set of
tones that occur after the user initially places a
trunk call. Alarm Tone 2 broadcasts periodically
after Alarm Tone 1 as a
continued reminder. Each alarm tone consists of three short beeps.
If programmed, DISA calls are disconnected unless the continue code is
entered by the user.
With the Long Conversation Cutoff feature, incoming
or outgoing central office calls can also be
disconnected.
Warning Tone for DISA Callers
For DISA callers, with this feature enabled, the warning tone timer begins
when an incoming
DISA call places an outgoing call and either the inter-
digit timer expires or the outgoing call is
answered.
If an outside call is transferred to forwarded off-premise using an outside
trunk, the warning tone
timer begins immediately. This occurs only if either
trunk involved in the call is programmed for
this feature (Program 14-01-
17). When transferring a trunk call off-premise, Program 14-01-13
must
be enabled (set to 1).
Conditions
Warning Tone for Long Conversation does not occur for incoming trunk calls.
Warning Tone for Long Conversation occurs for all outgoing
trunk calls, regardless
of how they are placed or other
outgoing restrictions.
Warning Tone for Long Conversation can be enabled for DISA calls.
To Next Page
Loading...
