NEC Univerge SV9100 - To Page into an External Zone

953
Program
Number
Program Name/Description
Input Data
Default
31-07-01
Combined Paging Assignments
Assign an External Paging Group (0 ~ 8) to an
Internal Paging Zone (0 = All Call, Zones
1 ~ 64) for Combined Paging. When an
extension user makes a Combined Page, they
simultaneously broadcast into both the External
and Internal Zone.
0 ~ 64
(0 = All internal paging)
1
31-08-01
BGM on External Paging – BGM
Assign the Background Music option for each
External Paging Speaker. If enabled, the
system plays Background Music over the zone
when it is idle.
External Paging Speaker/Zone:
1 ~ 9
0 = Disable
1 = Enable
0
Operation
To Page into an external zone:
1. Press External Paging key (Program 15-07 or SC 851: 19 for External Paging zones or 20 for
External All Call Paging).
2. Make announcement.
- OR -
1. At the multiline terminal, press Speaker or pick up the handset.
- OR -
At single line telephone, lift the handset.
2. Dial 803 and the External Paging Zone code (1~8 or 0 for All Call).
- OR -
Dial *1 and the Combined Paging Group code (1~8 or 0 for Internal/External All Call).
 Display indicates the Combined Paging as an External Page.
 If the Internal Page Zone is busy or if there are no extensions in a page group, the page may be
announced as an External Page only.
3. Make an announcement.
4. Dial 803 and the External Paging Zone code (1~8 or 0 for All Call).
- OR -
Dial *1 and the Combined Paging Group code (1~8 or 0 for Internal/External All Call).
 Display indicates the Combined Paging as an External Page.
 If the Internal Page Zone is busy or if there are no extensions in a page group, the page may be
announced as an External Page only.
5. Make an announcement.