NEC Univerge SV9100 - Placing an Outside Call with Pre-Dial

1398
Program
Number
Program Name/Description
Input Data
Default
24-09-01
Call Forward Split Settings – Call
Forwarding Type
Type of Call Forwarding.
0 = Call Forwarding Off
1 = Call Forwarding with both
ring
2 = Call Forwarding when no
answer
3 = Call Forwarding all calls
4 = Call Forwarding busy or no
answer
5 = Call Forwarding when busy
0
24-09-02
Call Forward Split Settings – CO Call
Forwarding Destination for Both Ring, All
Call, No Answer
Assign CO Call Forwarding Destination for ring,
all call and no answer.
Maximum of 24 digits (0 ~ 9,
*
,
#, @, P, R)
@ = Wait for Answer
Supervision - ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
No Setting
24-09-03
Call Forward Split Settings – Interim Call
Forwarding Destination for Both Ring, All
Call, No Answer
Assign Intercom Call Forwarding Destination
for ring, all call and no answer.
Maximum of 24 digits (0 ~ 9,
*
,
#, @, P, R)
@ = Wait for Answer
Supervision - ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
No Setting
24-09-04
Call Forward Split Settings – CO Call
Forwarding Busy Destination
Assign CO Call Forwarding for busy
destinations.
Maximum of 24 digits (0 ~ 9,
*
,
#, @, P, R)
@ = Wait for Answer
Supervision - ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
No Setting
24-09-05
Call Forward Split Settings – Intercom Call
Forwarding Busy Destination
Assign Intercom Call Forwarding for busy
destinations.
Maximum of 24 digits (0 ~ 9,
*
,
#, @, P, R)
@ = Wait for Answer
Supervision - ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
No Setting
80-01-01
(16)
Service Tone Setup – Lockout Tone
Lock Out Tone Repeat Count.
Value 0 ~ 255
Operation
Placing an outside call with pre-dial:
1. Dial 9.