513
Forced Trunk Disconnect
Description
Forced Trunk Disconnect allows an extension user to disconnect (release) another extension active
outside call. The user can then place a call on the released trunk. Forced Trunk Disconnect lets a user
access a busy trunk in an emergency, when no other trunk is available. Maintenance technicians can
also use Forced Trunk Disconnect to release a trunk on which there is no conversation. This can happen
if a trunk does not properly disconnect when the outside party hangs up.
Forced Trunk Disconnect abruptly terminates the active call on the line. Only use this feature in an
emergency and
when no other lines are available.
Conditions
This feature only works on an analog trunk. ISDN and IP trunks do not have the Forced Trunk
Disconnect available.
Default Setting
COS 15 = Enabled
COS 1~14 = Disabled
System Availability
Terminals
All Terminals
Required Component(s)
Analog Trunks
Related Features
Central Office Calls, Placing
To Next Page
Loading...
