NEC Univerge SV9100 - To Check the Number Saved for Last Number Redial; To Erase the Stored Number

836
Search for the desired number from the Redial List by pressing Redial or VOLUME▲ or
VOLUME ▼ keys.
- OR -
Press the Left Cursor key once and the VOLUME ▲ or VOLUME ▼ keys to find number.
3. Lift the handset or press Speaker to place the call.
 The system automatically selects a trunk from the same group as your original call and dials the last
number dialed.
- OR -
1. At the multiline terminal, press Speaker or lift the handset (optional).
- OR -
At the single line telephone, lift the handset.
2. Dial 816.
 The system automatically selects a trunk from the same group as your original call and dials the last
number dialed.
To check the number saved for Last Number Redial:
1. Press Redial or the Left Cursor key once.
The stored number displays for six seconds. The stored number dials out if you:
 Lift the handset.
 Press an idle line key.
- or -
 Press Speaker.
2. Press the Exit key.
To erase the stored number:
1. At the multiline terminal, press Speaker or lift handset.
- OR -
At the single line telephone, lift the handset.
2. Dial 876.