550
The PMS license is a system license.
The SV9100 Hotel license must also be installed.
BE114071
BE114072
BE114099
SV9100 PCPro,
Web browser to
PVAA card
Fidelio
requires the use of the PVA PMS blade, which serves as a gateway between the PMS
application, the
UNIVERGE SV9100 and UM8000 Mail voice mail when installed.
When the SV9100 is interfaced with an external PMS application, the first operator extension set in
Program 20-17-01 must be a physical phone connected to the phone system for all PMS features
to work.
The UNIVERGE SV9100 and UM8000 Mail must be licensed for Hotel/Motel for this feature to
work.
The supported PVA PMS protocols is Fidelio
The chassis to PVA PMS connection is via the LAN and an IP port only (default is 5129).
Room name can only be displayed on terminals set to 0 (Normal) in Program 42-02-01.
Refer to the UNIVERGE SV9100 Hotel/Motel Services Guide for complete programming
information.
Room to Room Calling Restriction
Prevent guests in one room from calling guests in another – a handy feature for guests that want to
maintain their privacy. If you need to, you can always allow inter-room calling (e.g., for families or groups
that have separate rooms).
Toll Restriction (When Checked In)
Control a guest’s long distance dialing automatically when they check in. Use this feature to set up two
different Toll Restriction modes. The first mode is for you and your staff when the room is checked out.
The second mode is for your guests when they check in. You may want to restrict the outside numbers
guests can dial, but allow your staff to call vendors and suppliers.
Room Status
Your phone and DSS Console can set and monitor the status of all your guest rooms: Checked In,
Checked Out, Maid Required and Maid in Room. Maximize room usage by coordinating your cleaning
staff and reservation desk. For example, you can dial simple codes to set a room status.
Room Status Printouts
The Room Status Printouts give you a concise overview of the status of all your guest rooms at a glance.
The printouts provide up to the minute reports showing Room Status, Room Call Restriction, Do Not
Disturb, Message Waiting and Wake Up Calls. If your cleaning staff needs to know which rooms to clean,
for example, just print out the report showing Room Status. This printout requires a connection to the
system using an IP post on the CPU.
DSS Console Monitoring
To Next Page
Loading...
