NEC Univerge SV9100 - To Cancel a Relay

520
To Cancel a Relay:
Multiline Terminal
1. Press Speaker.
2. Dial 880.
3. Dial Relay Number (0~8).
 0 is for the relay on the GCD-CP10, 1~8 are relays on the PGD(2)-U10 ADP.
- OR -
1. Press the Line Key assigned as a General Purpose Relay (the key is not lit).
- OR -
1. Wait for the drive timer to expire.
Single Line Telephone
1. Press Speaker.
2. Dial 880.
3. Dial Relay Number (0~8).
 0 is for the relay on the GCD-CP10, 1~8 are relays on the PGD(2)-U10 ADP.
- OR -
1. Wait for the drive timer to expire.