NEC Univerge SV9100 - Meet Me Internal Page

852
At the single line telephone, lift the handset.
2. Dial 865.
3. Dial the announced External Paging Zone (0~8).
 You connect to the other party.
Meet Me Internal Page
To make a Meet Me Internal Page:
1. At the multiline terminal, press Speaker or pick up the handset.
- OR -
At the single line telephone, lift the handset.
2. Dial 801 and dial the Internal Paging Zone code (0~9, 00~32 or 00~64).
- OR -
Dial *1 and the Combined Paging Zone code 1~8 (for Internal/External Zones 1~8) or 0 (for
Internal/External All Call).
3. Announce the zone.
- OR -
1. At the multiline terminal, press the Internal Paging Zone key (Program 15-07 or SC 851: 21 +
zone).
2. Announce the zone.
To join a Meet Me Internal Page:
1. At the multiline terminal, press Speaker or pick up the handset.
- OR -
At the single line telephone, lift the handset.
2. Dial 863 (if your extension is in the zone called).
- OR -
Dial 864 and the zone number (if your extension is not in the zone called).
- OR -
Press the Meet Me Conference/Paging Pickup key (Program 15-07 or SC 851: 23) if your
extension is in the zone called.