NEC Univerge SV9100 - To Activate Call Forwarding Off-Premise Non-Split; To Activate Call Forwarding Off-Premise Split; To Cancel Call Forwarding Off-Premise Non-Split

166
Operation
To activate Call Forwarding Off-Premise non-split:
1. At a multiline terminal, press Speaker.
- OR -
At a single line telephone, lift the handset.
2. Dial the Call Forwarding Service Code.
- OR -
At a multiline terminal only, press the Call Forwarding Programmable Function keys (Program
15-07-01, Program 15-07-10~Program 15-07-15 or SC 851 Key Code 10~15).
3. Dial 1 (Set).
4. Dial the Trunk Access Code (default: 9) + Number (9+2142622000).
 Trunk access codes are 9 (ARS/Trunk Group Routing), 704 + Line Group (1~9, 01~99 or 001~100) or
#9 + Line number (e.g., 05 or 005 for line 5).
 Your DND or Call Forwarding (Device) Programmable Function key flashes.
To cancel Call Forwarding Off-Premise non-split:
1. At a multiline terminal, press Speaker.
- OR -
At a single line telephone, lift the handset.
2. Dial the Call Forward Access Code (default not assigned).
3. Dial 0 (Cancel).
To activate Call Forwarding Off-Premise Split:
1. At a multiline terminal, press Speaker.
- OR -
At a single line telephone, lift the handset.
2. Dial the Call Forwarding Service Code.
3. Dial 1 (Set).
4. Dial 1 (Internal) or 0 (External).
5. Dial Trunk Access Code (default: 9) + number (9 + 2142622000).
 Trunk access codes are 9 (ARS/Trunk Group Routing), 704 + Line Group (1~9, 01~99 or 001~100) or
#9 + Line number (e.g., 05 or 005 for line 5).
 Your DND or Call Forwarding (Device) Programmable Function key flashes.