NEC Univerge SV9100 - To Redial Your Last Call

835
System Availability
Terminals
All Terminals
Required Component(s)
None
Related Features
Automatic Route Selection (ARS)
Repeat Redial
Save Number Dialed
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
11-12-12
Service Code Setup (for Service Access) –
Last Number Dial
Assign a service code (#5) to use Last Number
Dial.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
816
11-12-17
Service Code Setup (for Service Access) –
Clear Last Number Dialing Data
Assign a service code (776) to clear the Last
Number Dial.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
876
15-02-13
Multiline Telephone Basic Data Setup –
Redial List Mode
Select the type of numbers that are stored in
the Redial List – Internal and External numbers
(0) or External only (1).
0 = ICM/Trunk (Extension/Trunk
Mode)
1 = Trunk Mode
1
20-08-05
Class of Service Options (Outgoing Call
Service) – Dial Number Preview (Preset Dial)
Turn Off or On an extension user ability to use
Dial Number Preview. This program also turns
Off or On the Last Number Redial function.
0 = Off
1 = On
COS 1 ~ 15 = 1
Operation
To redial your last call:
1. Without lifting the handset, press Redial.
 The last dialed number is displayed.
2. To redial the last number, press #.
- OR -