NEC Univerge SV9100 - To Answer Delay Ringing Calls

326
Program
Number
Program Name/Description
Input Data
Default
22-01-04
System Options for Incoming Calls – DIL No
Answer Recall Time
A DIL that rings its programmed destination
longer than this time diverts to the DIL No
Answer Ring Group (set in Program 22-08).
0 ~ 64800 seconds
0 = No Overflow
0
22-02-01
Incoming Call Trunk Setup
Set the feature type for the trunk you are
programming.
Trunks 1 ~ 400
0 = Normal
1 = VRS (second dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode Switching
0
22-08-01
DIL/IRG No Answer Destination
If an incoming trunk call rings longer than the
DIL No Answer Time (Program 22-01-04), it
routes to the destination you specify in this
option. Determine if the destination should be a
Ring Group, In-Skin/External Voice Mail, or
Central Voice Mail.
0 = (No Setting)
001 ~ 100 = Incoming Ring
Group
102 = (In-Skin/
External Voice Mail
or InMail)
103 = Centralized VM
1
Operation
To answer Delay Ringing calls:
1. Go off-hook.
- OR -
Press Answer.
- OR -
Press the flashing key.
 Either Trunk key or CAR/SIE/VE key.