NEC Univerge SV9100 - To Intercept a Call to a Co-Worker’s Extension

354
Program
Number
Program Name/Description
Input Data
Default
11-12-28
Service Code Setup (for Service Access) –
Call Pickup for Another Group
Customize the Service Codes for call pickup for
another group.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
869
11-12-29
Service Code Setup (for Service Access) –
Direct Extension Call Pickup
Customize the Service Codes for direct
extension call pickup.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
715
11-12-30
Service Code Setup (for Service Access) –
Specified Trunk Answer
Customize the Service Codes for specified
trunk answer.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
872
20-06-01
Class of Service for Extensions
Assign a Class of Service to extensions
(1 ~ 15).
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
Extension port
101 = Class 15
All other
extension port =
Class 1
20-10-05
Class of Service Options (Answer Service) –
Directed Call Pickup for Own Group
Turn Off or On Directed Call Pickup for calls
ringing an extension Pickup Group (Service
Code 756).
0 = Off
1 = On
COS 1 ~ 15 = 1
Operation
To use Directed Call Pickup to intercept a call to a co-worker’s extension:
1. Pick up the handset or press Speaker.
2. Dial * * .
3. Dial number of extension whose call you want to intercept.
 If more than one call is coming in, the system sets the priority for which call it answers first.