NEC Univerge SV9100 - To Answer an Incoming Trunk Call; To Change the Ringing of Your Incoming Trunk; To Listen to the Incoming Trunk Ring Choices; To Use Universal Answer to Answer a Call Ringing over Paging System

194
Operation
To answer an incoming trunk call:
1. Lift the handset.
To use Universal Answer to answer a call ringing over the Paging system:
1. Go off-hook.
 Depending on system programming, this may answer the call and you can skip Step 2.
2. Dial #0.
 If you hear error tone, your extension Class of Service prevents Universal Answer.
To listen to the incoming trunk ring choices:
1. Press Speaker.
2. Dial 811 + 2.
3. Select the ringing (1~8) and tone range (1~4) you want to check.
4. Go back to step 3 to listen to additional choices or press Speaker to hang up.
To change the ringing of your incoming trunk:
1. Press Speaker.
2. Dial 820 + 2.
3. Select the ringing (1~8).
4. Press Speaker to hang up.